Skip to main content

District 11 WIP

After a bit of a delay, I've started working on the Shanty Town located across from the manufactorum.  This piece of terrain will have an 8" wide road with shacks stacked on both sides.  So far I have the hill and one side complete.


The road will curve to the right.  You can see the multilevel madness of it.  A 10 man squad can fit in each shack, but 5-6 man squads would have the easiest time moving through it from level to level.


This is the side that will be facing the bastion with moat, the bottom foam represents an impassible cliff-side. 



This is the side that faces the manufactorum, the upper level is only accessable by climbing up several other levels, although the large level below it is perfect for jump troops to try and land on.


I still need to cut my 2' by 2' base for it and work on the other side of the road.

Thanks for stopping by, and have a great day!

Comments

  1. When finished, this board will look so awesome that my eyes will melt with envy!

    Keep it up!

    ReplyDelete

Post a Comment

Popular posts from this blog

Building our Ruined Building Part 3

Welcome back,  we are ready to add some battle damage to our perfectly rectangular wall sections and get our ruined building finished up.

My tools used were a cordless drill with a 3/8" (10mm) bit and a pair of diagonal wire cutters.  Before I began, I coated all of the foam in PVA glue and a liberal dusting of sand.  I also coated the upper floors to add some texture.  I also used many pieces of cut up sprue to fill in the gaps where it might not be obvious that models were not supposed to be placed in that spot.  I took some pieces of sprue and used them to brace the upper floors.  Although the for sale sign was good thick plastic, it still flexed enough to concern me.  I used super glue to hold the sprue in place.  In the below view you can see the post added to support both levels.  A wire rope with knots was added for decoration.

You can see how the walls not have jagged edges and there are holes from shells drilled though the walls.  The amount of destruction is really a ma…

A look at some Citadel Paints

I was using some of my paints today and noticed something very interesting about the new paint range.  Not all of the pots are made equal.

If you look at #6, inside the blue circle is a cap hold upon device that uses friction to hold the cap open.  Its like a little rubber ramp.  Number 7, bought from the same store doesn't have it.  I bought 4 paints just recently and two had them and two didn't.  And it was random, I bought 2 base colors and only one had the ramp.  The layer I bought had one, but the technical primer did not.

Citadel Piants have 2 problems that I'll discuss:

1. A problem that arises with all of these paints is that when shaken up, a fair amount of paint sticks to the lid and then drips.  Where it drips depends on the cap design.  All of these caps are designed with an inner protrusion that is meant to direct the cap paint back into the bottle.  Lets look at them by type:
The inner protrusion fits snugly against the cap, so almost all of the paint drains …

A Ruined Manufactorum

It is finished.  Or wrecked?  Maybe completely wrecked?  Anyway, I have put enough details, paint etc on the second mega-terrain tile that it is certainly in playable condition.  Because I'm sure you want to get to the pictures, here they are:

Before:



More after the jump!